‘-Indoor alarm display with auto reset
audible alarm
-Unit complete with all wiring
HIGH or LOW function selectable
-Digital RF proximity probe
-Error detection for probe circuit
-Accuracy of probe best in industry;
+/- 3mm (1/8”)
-15m (50 foot) cable length standard;
custom cable lengths available
-No limit to transmission distance

‘-Outdoor NEMA 6P enclosure, battery
powered wireless with 5m (15ft) probe
-Digital RF proximity probe
-Wireless range 90m (300 feet), ISM
2.4 GHz, ICC and FCC 15 approved,
12 frequencies
-HIGH or LOW function selectable
-Indoor alarm display with audible
alarm auto reset
-Low battery warning
-Wireless communication or probe
error detection
-Accuracy of probe best in industry;
+/- 3mm (1/8”)

The economical S-R Series is an angle framed access cover with 300 lb. psf (1464 kg psm) load rating. Single and double door units are ideal for casting into concrete top slabs directly above submersible pumps and debris baskets. Please see the drawing page for standard features. This series can also be used for underground vaults that have provisions for drainage of incidental water. This Series should not be used if water intrusion is a determining factor.

The Oil Alert ™ – Water Discharge/Oil Containment system is used in elevator sump pits to remove water while retaining oil and other hydrocarbons.

Each BAF break away fitting consists of a cast iron base elbow which
is bolted to the floor of the wet well, lower and upper guide rail supports
and a cast iron moveable elbow with a sealing plate and o-ring. The
discharge flange on the elbow base will mate with a
standard 125lb. companion flange and gasket (supplied). The pump
is connected to the moveable elbow though a stainless steel nipple
supplied with each assembly.

The SJE Level Monitor™ CL system is a convenient way to monitor tank levels by
utilizing a scalable LED bargraph to represent the level as a percentage of a full
tank. The adjustable alarm is easy to set using the Alarm Level and Set buttons
on the touch pad. As the liquid level reaches the installer-specified alarm set
point, the audible alarm is activated. The audible alarm can be silenced using the
Test/Silence button, but the alarm light will remain on until the condition is
remedied.

Tank Alert alarms provide audio/visual warning of potential threatening liquid level conditions.

• 2-color molded enclosure offers a distinct look; translucent upper half illuminates in an alarm condition; DUO models feature a red LED for alarm 1 and amber LED for alarm 2
• Removable cover provides greater access for easier field wiring while the internal circuitry remains protected
• Interlocking enclosure features unique sound chamber to amplify the horn while helping prevent moisture from entering
• External mounting tabs for easy installation
• Enclosure meets Type 3R water-tight standard
• Enclosure has indicator marks on the bottom for easy placement of cord entry locations
• Automatic alarm reset
• Alarm test/horn silence switch
• Green power on LED indicator
• Includes auxiliary contacts for remote devices
• Includes 15′ (4.57 meters) SJE SignalMaster® control switch
• Alternative float models for high or low level alarm

Flood Buzz™ The simple (and inexpensive) solution to help you avoid costly water damage. There are no buttons to push, no programming to worry about, and no batteries to buy because Flood Buzz™ alarms already have batteries inside. Just place it and forget it. The Flood Buzz™ alarm will let you know if and when you have a leak. Flood Buzz™ alarms are good for three years. They are reusable and simple to test by dipping the two bottom prongs in a bit of water or placing on a damp cloth. Dry the prongs off and your Flood Buzz™ alarm is ready to be used again. For best protection, replace your Flood Buzz™ alarm by the “Replace by” date on the alarm

SWC Franklin Inline Pressure Control

Franklin Electric’s Inline Controls include five pump starting and control devices that pair with a variety of submersible or surface pumps up to 20 amps (or approximately 3 hp) to provide or boost the system’s overall water pressure – and in many cases, without the need of an additional bladder tank.