Hydromatic SKHD150 High-Head Cast Iron Effluent Pump

SKU: HYD 7400 Categories: ,

SKHD-150M2 Hydromatic Pump – no switch

Generates high heads for bigger drain fields.

KEY FEATURES

  • Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
  • Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
  • Upper & Lower Ball Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement
  • Optional Seal Failure Probe Warns of Seal Leak
  • Capacitor Start for Increased Starting Torque (single-phase models)

BODY CONSTRUCTION:  Class 30 Cast Iron
HORSEPOWER:  1-1/2 HP
MAXIMUM HEAD:  127′
MAXIMUM CAPACITY:  55 GPM (3.5 LPS)
FLOW at 10′ LIFT:  55 GPM (3.5 LPS)
SWITCH TYPE:  standard is no switch. Optional wide-angle tethered Float Available for 1-Phase Models
MINIMUM SUMP DIAMETER:  Simplex: 24″ / Duplex: 36″
DISCHARGE PIPE SIZE:  1-1/2″ NPT
MAXIMUM SOLIDS HANDLING SIZE:  3/4″
AMP DRAW (full load):  6.1 amps on 208v, 3phase / 12 amps on 230v, 1phase / 6 amps on 230v, 3phase / 2.5 amps on 460v / 2 amps on 575v
CORD LENGTH:  20′ STW-A
VOLTAGE:  230v 1-phase OR 208v, 230v, 460v, or 560v 3-phase, 60 Hz
MAXIMUM LIQUID TEMPERATURE:  140°F (60°C)
IMPELLER CONSTRUCTION:  Thermoplastic semi-open

What Th
ey Say
Our Clients