Liberty FL50-Series effluent pump

SKU: LIB 15100 Categories: ,

FL51A-2 Liberty Effluent Pump

1/2 hp.
1-1/2″ or 2″ Discharge
3/4″ Solids Handling

The FL50-series by Liberty is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications.  Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL50 will provide years of reliable performance.

Submersible 3450 RPM, oil filled and hermetically
sealed. Class B insulation rating. 17-4 PH stainless
steel rotor shaft. Thermally protected on single
phase models. Three phase models shall have
overloads incorporated into the control panel,
properly sized for the horsepower and
amperage of pump.
Cast iron – class 25, semi-open design capable
of passing a minimum 3/4″ solids.
Carbon/ceramic unitized design with BUNA N
elastomers and stainless steel housing.
10′ cord length – Standard. Quick-disconnect
design allows for easy field replacement.
Optional lengths available per chart.
Automatic models shall be controlled by an
adjustable wide-angle style switch sealed in
a polymeric float. A series piggy-back style
plug shall be provided to allow for manual
bypass operation. Not available on 50′ models
and 3-Phase.
2″ FNPT with a 1-1/2″ FNPT threaded cast iron
flange provided.
Height: 16.4″ Width: 11.2″
(manual models)
Maximum Fluid Temperature:
100˚ F, 40˚ C Continuous Duty 140˚ F, 60˚ C Intermittent

What Th
ey Say
Our Clients